Search Results
TO-354-P Precision Front Geometry Adjustment Set ( For Kyosho MP11 /MP11E)
Customized for Kyosho MP11This set integrates aluminum steering plate, carbon fiber front bumper plate and center positioning tool, enabling one-stop upgrade of steering precision and front structure stability. No complex modification required, ready to install and use immediately. Aluminum Steering...
TO-354-D-S Steel A Mount ( For Kyosho MP11 /MP11E)
Crafted from high-quality steel, it boasts deformation resistance and wear durability, with a single unit weight of 22.4g, helping enhance vehicle handling stability. Meanwhile, it can be used as a counterweight to flexibly adjust the front-rear weight distribution ratio and...
TO-295-MP11 7075-T6 Alum. Middle Gear Lower Block ( For Kyosho MP11 )
* The center differential main mount is made of 7075-T6 aluminum alloy with a blackened finish and refined bevel design. It features high torsion resistance, firmly locks the center differential and CVD drive shafts for improved transmission accuracy. Its structural...
TO-312-MP11 2.0mm FRP Front/Rear A-Arm Upper/Lower Stiffeners ( For Kyosho MP11 )
Made of fiberglass board with carbon fiber patterns on the surface and reinforced rocker arm structure, it is more suitable for low grip areas.
TO-235-MP11 Stainless Steel Front Chassis Skid Protector ( Kyosho MP11 ) 2pcs.
Features:1. Effectively reduce the friction between the chassis and the ground or track;2. Reduce wear and prolong the use of the chassis;3. Reduce replacement frequency and maintenance cost;4. Effectively enhance the performance of model cars.
TO-246-MP11 Graphite Front / Rear A-arm Stiffeners 1mm/1.5mm( For Kyosho MP11 )
This product is made of carbon fiber. After installation, it effectively enhances the rocker arm structure and is more suitable for low-traction surfaces.
TP-200R-MP11 64 Titanium CR Drive Shaft 118mm ( For Kyosho MP11 )
64 Titanium Drive Shaft eliminates friction and creates a more efficient drivetrain, increased acceleration and more traction compared to the stock universal driveshafts.Features:Lightweight and DurableIncreased acceleration and efficiency
TO-302-MP11 7075-T6 Hard Coated Alum. Servo Saver Arm ( Kyosho MP11/MP11E)
Crafted from premium 7075-T6 aluminum alloy with black hard coated treatment, this product delivers significantly enhanced hardness and wear resistance. It effectively cushions impacts and protects the servo, while being fully compatible with the original IF720 part for hassle-free installation. Experience...
TSSU-MP11 64 Titanium Screw set ( UFO Head ) 188pcs. ( For Kyosho MP11 )
This high quality upgrade ensures exceptional durability while significantly reducing weight compared to traditional steel screws, giving your CAR competitive edge on the track.
TO-266-MP11 Graphite ST/TH Servo Plate ( For Kyosho MP11 )
TO-266-MP11-A： Graphite ST Servo Plate ( For Kyosho MP11 )The carbon fiber material is lightweight yet high in strength, which can enhance the stability of the servo and reduce operational wear.It is perfectly compatible with the original IF702 component, requiring...
TO-357-MP11 Peek Shock Shaft Guides ( For Kyosho MP11 )
Upgraded PEEK material: heat-resistant, ultra-wear-resistant, high-strength, smoother, longer service life.Compared with PEEK, comprehensive performance is greatly improved for smoother suspension and more durable racing.
TO-250-K Metal P/M Diff. Gear ( For Kyosho MP9 / TKI3/TKI4/MP9e EVO/MP10/MP11 )
A set of specially coated metal gear internals for the MP9 TKI4 and TKI3 differentials. Each set contains six gears as well as pins and shims and using the parts will reduce overall wear while offering a smoother diff action...
TO-354-N One Piece Graphite Rear Wing Stay Reinforcement And Heightening Plate ( For Kyosho MP11/MP11E )
This One Piece Graphite Rear Wing Stay Reinforcement And Heightening Plate is multi-functional and practical. * Plate A can be independently clipped onto the wing base for standalone use, suitable for basic requirements. * Plate B offers dual flexible uses:...
TO-354-F 7075-T6 Alum. C Mount ( For Kyosho MP11/MP11E )
It is made of 7075-T6 aluminum alloy, undergoes black anodization, and is further equipped with an exquisite folded edge design, which enhances both appearance texture and structural strength.It is compatible with the original IF708 and supports direct replacement and installation.
TO-354-J Spring Steel King Pin L ( Kyosho MP11/MP11E) 2pcs.
*This product shares compatibility with the original factory part IF710—no modification is required, enabling direct replacement. *Crafted from high-quality spring steel, compared with original factory components, it not only boasts superior bending resistance and toughness but also delivers excellent wear...
TO-267-MP11 Graphite Center Gearbox Plate With Bearing ( For Kyosho MP11 )
Crafted from high-quality carbon fiber, it combines lightweight properties and high toughness: Reduces the overall vehicle weight to enhance handling responsiveness; Resists impact and deformation, ensures stable operation of the center differential, and extends the service life of related components.Comes...
TO-354-F-S Steel. C Mount ( For Kyosho MP11 /MP11E)
Crafted from high-quality steel, it boasts deformation resistance and wear durability, with a single unit weight of 20.6g, helping enhance vehicle handling stability. Meanwhile, it can be used as a counterweight to flexibly adjust the front-rear weight distribution ratio and...
TBB-MP11 64 Titanium Black Coating Turnbuckle Set ( For Kyosho MP11 /MP11E)
The new Coating Titanium Turnbuckle Set upgrade, high-quality, high-performance titanium alloy material, more durable, tougher, excellent corrosion resistance and toughness, lightweight characteristics can effectively reduce the weight of the car, also to maintain stability, so that the speed and control...
TO-354-G-S Steel D Mount ( For Kyosho MP11/MP11E )
Crafted from high-quality steel, it boasts deformation resistance and wear durability, with a single unit weight of 20.3g, helping enhance vehicle handling stability. Meanwhile, it can be used as a counterweight to flexibly adjust the front-rear weight distribution ratio and...
TP-223-C 64 Titanium Steering Screw ( Kyosho MP11 /MP11E) 2pcs.
This product is made of 64 titanium alloy, featuring light weight, high hardness, wear and corrosion resistance, which extends its service life.It is compatible with the original IF719 and can be directly replaced without modification.After installation, it enables stable force...
TP-200F-MP11 64 Titanium CF Drive Shaft 86mm ( For Kyosho MP11 )
64 Titanium Drive Shaft eliminates friction and creates a more efficient drivetrain, increased acceleration and more traction compared to the stock universal driveshafts.Features:Lightweight and DurableIncreased acceleration and efficiency
TP-223 64 Titanium King Pin S/L ( Kyosho MP11 ) 2pcs.
Features: * This product is interchangeable with the original IF710, requiring no modifications and enabling direct replacement. * Crafted from 64 titanium alloy, it features a lightweight design with excellent hardness, resistance to wear and corrosion, and an extended service...
TO-213-MP11 Graphite Upper Plate ( For Kyosho MP11/MP11E)
Crafted from high-quality carbon fiber, it is lightweight yet tough: Reduces vehicle weight burden and enhances handling flexibility; Resists impact and deformation, ensures front structural stability, and extends the service life of components.Compatible with the original IF729, no additional modifications...
TO-281-MP11 7075-T6 Alum. Rear Tension Rod Mount ( For Kyosho MP11/MP11E )
Rear Support Mount made of 7075-T6 Alum., treated with a special black anodization process, achieves optimal strength and hardness. It enhances the rigidity of the model car's rear section, improves cornering performance, and allows your model car to exhibit exceptional...
TO-354-A-1 Graphite Plate Rear Compostite Brace 1.0mm ( For Kyosho MP11 )
The high-strength carbon fiber material can enhance the torsional deformation resistance of the rear chassis. It optimizes handling response during high-speed cornering and easily improves the overall performance of the MP11.It is perfectly compatible with the original IF722, requiring no...
TO-354-M Servo Saver Adjust Dust Cover ( For Kyosho MP11 ) 3pcs.
Made of highly elastic sponge, it is soft and non-damaging to components.Effectively blocks dust and debris from entering the steering gear protector, ensuring its smooth operation.
TO-354-E-S Steel B Mount ( For Kyosho MP11/MP11E )
Crafted from high-quality steel, it boasts deformation resistance and wear durability, with a single unit weight of 15.77g, helping enhance vehicle handling stability. It is compatible with the original IF707 and can be directly replaced and installed without additional modifications.
TO-278-MP11 Hard Coated 7075-T6 Alum. F/R Axle Shaft ( For Kyosho MP11 /MP11E)2pcs
The transmission adapter cup is made of 7075-T6 aluminum and processed by hard coated technology, providing high strength, light weight, high transmission efficiency and durability.Shared with original IF746-02 / IF746-03GM.
TO-354-O 7075-T6 Steering Plate With Bearing ( For Kyosho MP11/MP11E )
Crafted from 7075-T6 aluminum with black anodizing and laser etching, balancing aesthetics and strength. Pre-installed precision roller bearings, fully compatible with original IF718 for seamless replacement. Enhances steering rigidity and durability.
TO-279-G POM Bearing Case 18 x 5.5mm ( 8x16x5 ) 2pcs. ( For Kyosho MP11 )
POM Bearing Case , compatible with 8x16x5 bearingsMade of POM material, it is wear-resistant and durable, fits precisely, helping to improve component stability.Shared with the original IFW332-01B
TO-354-Q Stainless Steel Middle Gear Lower Block Spacer 1.0mm ( For Kyosho MP11 )
Stainless steel gaskets replace original plastic gaskets, dispersing screw locking pressure to prevent chassis deformation, ideal for gear replacement and assembly.
TO-354-K Spring Steel Knuckle Arm Bushing ( Kyosho MP11 ) 4pcs.
It is made of 7075-T6 aluminum alloy, treated with black anodization, and features an exquisite folded edge design that enhances both appearance texture and structural stability.It is compatible with the original IF707 and allows for direct replacement and installation.
TO-254-MP11 7075-T6 Alum. One Piece Engine Mount Plate ( For Kyosho MP11 )
It is made of 7075-T6 aluminum alloy, with a gold-black surface treatment and exquisite reverse edges, presenting a refined and high-quality appearance.The integrated structure can effectively enhance the rigidity of the base plate and improve operational stability. The included fixing...
TO-279-MP11 7075-T6 Alum. Rear Hubs ( For Kyosho MP11 )
The aluminum alloy rear wheel mount has enhanced strength and hardness, improving durability and adjustability. The top part connected to the hub is a carbon fiber connection, which features multiple adjustment functions. Meanwhile, matched with different embedded adjustment blocks, it...
TO-304-MP11 Steel CF/CR Drive Shaft ( For Kyosho MP11 )
The drive shaft made of spring steel enables high transmission efficiency and durability of the vehicle, significantly enhances the vehicle's starting performance, and improves transmission efficiency and speed.
TB-MP11 64 Titanium Turnbuckle Set ( For Kyosho MP11 /MP11E)
Turnbuckle Set using high quality titanium , will shed weight in all the right places while retaining easy adjustability and timeless looks. Super durable Titanium with a thick center section to provide incredible strength that can stand up to repeated...
TO-354-D 7075-T6 Alum. A Mount ( For Kyosho MP11/MP11E )
Crafted from 7075-T6 aluminum alloy with a black anodized finish, it features an exquisite folded edge design that enhances both aesthetic appeal and structural integrity.Compatible with the original IF706, it can be directly replaced and installed.
TO-354-L 7075-T6 Alum. Steering Arm ( For Kyosho MP11/MP11E )
Crafted from high-strength 7075-T6 Alum. and finished with black anodization, it boasts a sleek, refined texture and excellent wear resistance. It enhances structural rigidity, significantly upgrading deformation resistance and impact durability to handle the high-intensity control demands of the race...
TO-220-MP11 Stainless Steel Rear Chassis Skid Protector ( Kyosho MP11 ) 2pcs.
Features:1. Effectively reduce the friction between the chassis and the ground or track;2. Reduce wear and prolong the use of the chassis;3. Reduce replacement frequency and maintenance cost;4. Effectively enhance the performance of model cars.
TO-240-K Hard Coated 7075-T6 Alum. Shock Standoffs (For Kyosho MP9 TKI3/TKI4/MP9e EVO/MP10/MP11) 4pcs.
It is made for the Kyosho MP9 TKI4 and TKI3 series of buggies are aluminium shock stand offs. The parts are machined from aircraft-grade 7075-T6 aluminium and will reduce the overall weight while lowering the centre of gravity. The stand...
TO-354-I Spring Steel King Pin S ( Kyosho MP11/MP11E) 2pcs.
*This product shares compatibility with the original factory part IF710—no modification is required, enabling direct replacement. *Crafted from high-quality spring steel, compared with original factory components, it not only boasts superior bending resistance and toughness but also delivers excellent wear...
TO-354-B 7075-T6 Hard Coated Alum. Ball Set ( For Kyosho MP11/MP11E ) 26pcs.
This product is made of 7075-T6 aluminum alloy, featuring impact resistance and low deformation tendency, while effectively reducing weight. After hard anodizing treatment, its wear resistance and corrosion resistance are further enhanced.This product can be accurately adapted to the rocker...
TO-354-E 7075-T6 Alum. B Mount ( For Kyosho MP11/MP11E )
It is made of 7075-T6 aluminum alloy, treated with black anodization, and features an exquisite folded edge design that enhances both appearance texture and structural stability.It is compatible with the original IF707 and allows for direct replacement and installation.
- Page 1 of 4
- Next